Purpose

Control Remap scales any control signal from one range to another with configurable response curves. Use it to turn a 0-1 MIDI CC into a 20 Hz-20 kHz logarithmic sweep for a filter cutoff, add a dead zone to a pitch wheel, invert a fader, or clamp an LFO to a safe range.

Use

Place Control Remap after any node that outputs a control signal (MIDI Learn, MIDI Note, Smooth, or a TD CHOP Source). Set the input and output ranges, choose a response curve, and wire the output into the parameter you want to drive. Works on all channels of the incoming stream.

Inputs and outputs

• Input 0: in — control_f32_v1 (required). The control signal to remap.
• Output 0: out — control_f32_v1. The remapped signal.

Controls

• Inmin / Inmax — Expected input range. Default 0-1.
• Outmin / Outmax — Target output range. Default 0-1.
• Curve — Response shape: linear, log (fast initial response), exp (slow initial, fast top), or power (custom exponent).
• Exponent — Power curve exponent (used when Curve is set to power). Default 2.0.
• Deadzone — Center dead band width as a fraction of the input range (0-0.99). Values within the dead zone snap to center; outer regions rescale to fill the full range. Useful for joysticks and pitch wheels.
• Invert — Flip the output direction.
• Clamp — Clamp output to the Outmin/Outmax range. On by default.

Notes

• Despite the internal file name, this node is not MIDI-specific. It works on any control_f32_v1 stream.
• Processes at real-time audio rate with smoothed parameters for glitch-free automation.
• Reveal channels show the active input and output range values.

Ports

Inputs

• in row required
  control_f32_v1

Outputs

• out row
  control_f32_v1

Parameters

Inmin (Inmin) Float op('control_remap').par.Inmin

Default:

0

Range:

-100000 to 100000

Inmax (Inmax) Float op('control_remap').par.Inmax

Default:

1

Range:

-100000 to 100000

Outmin (Outmin) Float op('control_remap').par.Outmin

Default:

0

Range:

-100000 to 100000

Outmax (Outmax) Float op('control_remap').par.Outmax

Default:

1

Range:

-100000 to 100000

Curve (Curve) Menu op('control_remap').par.Curve

Default:

0

Options:

linear, log, exp, power

Exponent (Exponent) Float op('control_remap').par.Exponent

Default:

2

Range:

0.01 to 10

Deadzone (Deadzone) Float op('control_remap').par.Deadzone

Default:

0

Range:

0 to 0.99

Invert (Invert) Toggle op('control_remap').par.Invert

Default:

Off

Options:

Off, On

Clamp (Clamp) Toggle op('control_remap').par.Clamp

Default:

On

Options:

Off, On